描述：LANKAI 恒温FOC直流无刷电机控制器:①融合最新FOC正弦波矢量控制技术和模糊PI控制技术，运行平稳，缓启缓停，大力矩，轻噪音，发热低，带过流过速堵转保护电机，可长时间稳定运行。②采用模糊PID控温，超调小,稳定快，精度高。恒温自适应PID，一键自整定。③支持232接口和标准485ModBus-RTU协议。
| 品牌 | 其他品牌 | 电动机功率 | 0.06-0.24kW |
|---|---|---|---|
| 外形尺寸 | 92mm*150mmmm | 重量 | 2.5kg |
| 应用领域 | 环保,生物产业,电子,电气,综合 | 速度范围 | 0-1500RPM |
| 分辨率 | 1RPM | 电机类型 | FOC矢量正旋波直流无刷电机，伺服电机 |
| 电机功率 | 驱动电流2.5A/5A/10A | 供电电源 | 直流24V |
| 程序段 | 99段编程 | 恒温范围 | 0-100°C/-90℃-400℃ |
| 传感器类型 | 热敏电阻/PT100 | 控温精度 | 0.1°C |
适用范围 Application
LANKAI 恒温FOC直流无刷电机控制器广泛适用于各式振荡器，摇床摇瓶机，电动搅拌器，磁力搅拌器，反应釜等高精度恒速设备。
Application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.
产品特点 Feature
LANKAI 恒温FOC直流无刷电机控制器LKSC-C系列产品是高集成智能温速一体控制模块，其性能如下：
①采用最新FOC 正弦波矢量控制技术和模糊PI控制技术，运行平稳，缓启缓停，大力矩，轻噪音，发热低，可长时间稳定运行，带过流过速堵转保护电机等功能。标配57、86电机, 也可适配其他支持FOC的无刷电机。
②适配直流无刷电机伺服电机。恒速，恒扭矩模式、电机正反转可切换。
③采用多年自研模糊PID控温，超调小,稳定快，过冲低。自适应PID，一键自整定。
④超温，传感器脱落报警保护，可设置99段程序。
⑤扩展：支持标准RS485等通用接口，可配置MODBUS RTU 通讯协议，一台主机控制多套设备，EEPROM存储下载，数据自采集。可接上位机软件，查看历史实时数据或者曲线。
①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.
②Can set to operate by constant speed or constant torque mode.
③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.
④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.
⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.
技术参数 Technical Parameter
测量范围 Temperature measurement range | 0-100°C/ -90℃-400℃ | ||||||
分 辨 率 Display resolution | 0.1°C | ||||||
输入方式 Input mode | 热敏电阻/PT100 Thermistor/PT100 | ||||||
输出方式 Output mode | 220V/24A可控硅输出 220V/24A Silicon Controlled rectifier (scr) output | ||||||
负载功率 Load power | 制冷（风机）0-2000W 25A继电器，加热0-2000W可控硅, 25A继电器保护 Refrigeration (fan) 0-2000W 25A relay,Heating 0-2000W thyristor, 25A relay protection | ||||||
速度范围 Measurement range | 0-1500RPM | ||||||
测量误差 Inaccuracy of measurement | ±1%FS ±1% Revolution/minute | ||||||
分 辨 率 Display resolution | 1 RPM | ||||||
电机类型 Motor Type | FOC矢量直流无刷电机或伺服电机 FOC vector control brushless DC motor or servo motor | ||||||
电机功率 Motor power | 驱动电流 2.5A/5A/10A Drive current 2.5A/5A/10A | ||||||
供电电源 Supply voltage | 直流24V DC24V | ||||||
程序段 Program segment | 99段编程 10 program segments | ||||||
定时范围 Timer range | 0-99H59Min | ||||||
工作环境 Working condition | -5℃-50℃，相对湿度35%-85% Environment temperature:-5℃-50℃,Relative humidity：35%-85% | ||||||
外观尺寸 Exterior size | 92mm*150mm | ||||||
开孔尺寸 Hole size | 86mm*144mm | ||||||
电源板尺寸 Power Panel size | 110mm*170mm (10A) & 100mm*100mm(2.5A &5A) | ||||||
