描述：LANKAI 高精度FOC直流无刷电机控制器:①融合新的FOC正弦波矢量控制技术和模糊PI技术，缓启缓停，大力矩，轻噪音，发热低，可长时间稳定运行，并带过流过速堵转保护功能。②支持电脑 232和485ModBus-RTU协议，一台主机控制多套电机套件。可接电脑上位机软件控制，PLC等，支持MODBUS协议标准外设.
| 品牌 | 其他品牌 | 电动机功率 | 60/120/240kW |
|---|---|---|---|
| 外形尺寸 | 96*96mm | 重量 | 0.3kg |
| 应用领域 | 环保,生物产业,文体,电子,综合 | 速度范围 | 0-1500RPM |
| 分辨率 | 1RPM | 电机类型 | FOC直流无刷电机,伺服电机 |
| 电机功率 | 驱动电流2.5A/5A/10A | 供电电源 | 直流24V |
适用范围 Application
LANKAI 高精度FOC直流无刷电机控制器广泛适用于各式振荡器，摇床，电动搅拌器，反应釜等高精度恒速设备。
DC motor constant speed controller application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.
产品特点 Features
LANKAI 高精度FOC直流无刷电机控制器LKSC-C系列是高性能、高精度的智能速度控制模块，其特点如下：
①采用最新FOC 正弦波矢量控制技术和模糊PI控制技术，运行平稳，缓启缓停，大力矩，轻噪音，发热低，可长时间稳定运行，带过流过速堵转保护电机等功能。
②恒速， 恒扭矩模式可一键切换。
③可集成恒温功能， 可组合加热、制冷、恒湿、风机、门锁等功能。
④可设置99段程序，多种液晶显示规格可选。
⑤标配1500RPM，扭矩0.2-1.2NM的57&86直流无刷电机，也可适配其他支持FOC的无刷电机或伺服电机
⑥ 扩展： 支持 232接口和标准485ModBus-RTU协议，可接电脑上位机软件控制，PLC等，支持MODBUS协议标准外设。
①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.
②Can set to operate by constant speed or constant torque mode.
③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.
④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.
⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.
技术参数 Technical Parameter
速度范围 Measurement range | 0-1500RPM | ||||||
测量误差 Inaccuracy of measurement | ±1%FS ±1% Revolution/minute | ||||||
分 辨 率 Display resolution | 1 RPM | ||||||
电机类型 Motor Type | FOC矢量直流无刷电机，伺服电机 FOC vector control brushless DC motor， servo motor | ||||||
电机功率 Motor power | 驱动电流 2.5A/5A/10A Drive current 2.5A/5A/10A | ||||||
供电电源 Supply voltage | 直流24V DC24V | ||||||
程序段 Program segment | 10段编程 10 program segments | ||||||
定时范围 Timer range | 0-99H59Min | ||||||
工作环境 Working condition | -5℃—50℃，相对湿度35%—85% Environment temperature:-5℃—50℃, Relative humidity：35%—85% | ||||||
外观尺寸 Exterior size | 96mm*96mm | ||||||
开孔尺寸 Hole size | 92mm*92mm | ||||||
电源板尺寸 Power Panel size | 110mm*170mm (10A) & 100mm*100mm(2.5A &5A) | ||||||
